Henriksdal's new look

Materials: Henriksdal bar stool and wool yarn scraps

Description: Pimp up your stool with scraps of wool yarn: wrap different colors of yarn around the stool and tie under the seat.

~ Rosandra

More hacks on IKEAHackers.net

Henriksdal's New Skirt

Materials: Henriksdal Chair and Slip Cover

Description: While I love love love Ikea prices, sometimes the super clean lines and modern style doesn't mesh with my traditional home. So, in about an hour and with less than $10, I outfitted the Henriksdal with a new, frou frou skirt! Here's how:

1) Cut my standard 54" wide decorator fabric in two 8" strips.
2) Hemmed the top and bottom of each strip.
3) Put the slip cover on the chair and pinned the strips right on top of the seam of the seat seam. I put small pleats every few inches.
4) Slipped the cover off (carefully) and sewed a straight top stitch.
5) For the seat back applique, I cut a quatrefoil design out of my fabric. I also cut a "W" out of burlap.
6) Used Heat n Bond Lite to iron the applique to the slip cover.

Then sit back and admire your super traditional Ikea chair!

See more of the skirt for Hendriksal.

~ Amanda @ Dixie Delights, Atlanta

Customize Your Henriksdal Slipcovers With Fabric Paint and A Stencil

Materials: - your Henriksdal slipcovers - fabric paint (I've also heard good things about silk screen paint) in the color(s) of your choice (I mixed together 2 colors, and wound up using a total of 22 ounces of paint) - 1 small artist brush - 1 slightly larger brush - a bowl for mixing/holding the paint - a digital image of a pattern that appeals to you - a few small pieces of cardboard (like the size of a matchbox) - a washable fabric pen

Description:
Step 1: Create a paper stencil of your pattern. I just printed out a full-page photo of a fabric I liked on typing paper and then cut out the pointed oval shapes with an exacto knife. Now I had a stencil that I could use to create the pattern vertically on my chairs! (I made a few of these stencils since the process of tracing the stencil onto the fabric caused the edges of the stencil to get a little wonky over time.)

Step 2: Trace the stencil onto your fabric. Pick a starting point for your stencil that will act as a guide to keep the repeating pattern level -I chose the seam along the top of the chairs and it worked really well.

Tip: If your pattern will be wrapping around a corner, think about where you want the pattern to stop. As you can see in the photo below, I let the pattern wrap around the top of the chairs from the front to the back, and from the bottom seat cushion onto the lower sides of the chair - but I stopped the pattern at the vertical seam between the front and back of the chair (if that makes sense). Deciding where to break the pattern will help prevent the pattern from meeting up in an unattractive or weird way.

You don't have to use a fabric pen to trace your pattern, but I highly recommend it - it's great for those "oops" moments.

Step 3: Mix your paints. Don't fret if Michael's doesn't sell the exact color of fabric paint that you want - you can just mix it up yourself to create a custom color. I mixed 1 part Marine Blue with 2 parts Turquoise to create the deep teal color for my chairs. Tip: When storing my bowl full of paint between painting sessions, I like to cover the bowl with plastic wrap and press down the plastic wrap so that it is touching the paint and the sides of the bowl, and then stick it in the fridge. This helps keep the paint from hardening.

Step 4: Fill in the stencil with paint. This is the part that takes f.o.r.e.v.e.r. Like for reals. Tip: Here's what worked best for me - I used the small artists brush to do the outline of 2-3 ovals, then filled them in with the larger brush. Do only a few of them at a time or else the outline will get kind of thick and crusty and you'll be able to see it even after the paint dries. Using a small brush was great for the outline because it lets you get really crisp lines. Also, when you reach creases in the fabric (like where the back rest meets the seat cushion) those small pieces of cardboard come in handy - just stick them in the crease to keep the paint from smudging.

And that's it! Easy, right? And since all of this was done using fabric paint the slipcovers are 100% washable. For more info, stop by www.itsgreattobehome.net!

~ Liz @ It's Great To Be Home

Henrikdal does a wheelie

Materials: Henriskdal bar stool, castors, Bemz slipcover, saw, drill, screws, screw driver

Description: This is a short and sweet one. We liked the look, size and shape of the Henriksdal bar stool for the Bemz Inspiration Store but were finding it was impeding movement. Plus, its dimensions were not quite right. It sits by the swatch table but anyone in retail knows how often you have to get up and move around the room. To make life easier our Bemz DIY:er personalised it to better suit its function.

The legs were sawn off to achieve the right height, i.e., to fit snuggly under the table so that legs can be crossed comfortably yet still high enough that arms rest correctly when typing on a laptop.

Note! Keep in mind the height of the castors you will use when deciding how much of the leg to saw off. The castors will obviously add height on.

Then simply screw in castors of choice. To alleviate the screwing in process, a hole can be started with a drill, using a bit a size smaller than that of the screw.

And voila! A new Henriskdal desk chair on wheels with a Designer slipcover from Bemz in Marimekko's Unikko Black. (The poster in the background is of a Henriksdal dining chair with Bemz cover in Sagrada Blossom fabric from Designers Guild).

We made ours and the osteopaths day!

~ Sara at Bemz