"I wanted a solid built-in office solution with heavy duty wall-mounted bookshelves above a long (12') counter top/desk/workspace with ample storage that would fit into an 18" deep nook under a sloped ceiling. Ikea doesn't really have anything purpose-made for this situation. Most of the bookshelves are either free-standing units or rather weak decorative wall shelves. So for the upper shelves I found that horizontal Akurum kitchen cabinets (30"x15"x12") were good for heavy books and inexpensive without the doors/hardware.
For the work surface/drawers, I found that none of the kitchen or office products were exactly the right depth/height. The solution: Godmorgon bathroom sink cabinets (without sinks; on 4 inch legs). Pricey, but well made with solid wood drawer interiors. Three units fit perfectly in 12' of space, but the units are conveniently (intentionally?) designed so that they can be assembed as a 23.5" wide two-drawer half-unit. So I did this with one of them leaving a sitting/desk space. I ripped 96" and 49" Numerar kitchen countertops (metal edges and matching wood grain surface) down to the right depth and combined they are the perfect length. Draw bolts and black automotive silicone adhesive made the seam practically disappear (it looks worse in the pictures than it really is). I finished off with minimal Grip drawer pulls instead instead of the large handles that were included."
For the work surface/drawers, I found that none of the kitchen or office products were exactly the right depth/height. The solution: Godmorgon bathroom sink cabinets (without sinks; on 4 inch legs). Pricey, but well made with solid wood drawer interiors. Three units fit perfectly in 12' of space, but the units are conveniently (intentionally?) designed so that they can be assembed as a 23.5" wide two-drawer half-unit. So I did this with one of them leaving a sitting/desk space. I ripped 96" and 49" Numerar kitchen countertops (metal edges and matching wood grain surface) down to the right depth and combined they are the perfect length. Draw bolts and black automotive silicone adhesive made the seam practically disappear (it looks worse in the pictures than it really is). I finished off with minimal Grip drawer pulls instead instead of the large handles that were included."
No comments:
Post a Comment